• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

Aileron bellcrank to aileron pushrod,rod end bearings

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mc06854

Well-Known Member
*
Joined
Oct 30, 2012
Messages
493
Reaction score
680
Location
Portland, tx
Does anyone have a part number from ACSS or another source for 1/4 threaded male rod End bearings that will work for the pushrods from bellcrank to aileron. I have some 1/4 SS rod I’m going to have threaded to make these. Just need 4 rod end bearing. Thanks.
41139AFD-349D-484B-AF82-CBDCD49D44ED.jpeg
 

Latest posts

Back
Top