• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

Pitts fuel tank mass production !

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

chrislange

Well-Known Member
Supporting Member
Joined
Feb 23, 2018
Messages
247
Reaction score
559
Location
Germany
Hi Guys,

The last couple days a friend of mine and I tried to build some S1 fuel tanks. It was the first time for us working with sheet metal but luckily we had some great help from an experienced builder. I would say it went quite well. We have 4 fuel tanks that are waiting to be welded.
Here are some pictures :

photo_2023-01-27_11-02-09 (2).jpg
photo_2023-01-27_11-02-10.jpg
photo_2023-01-27_11-02-11.jpg
photo_2023-01-27_11-02-14 (2).jpg
photo_2023-01-27_11-02-16.jpg
photo_2023-01-27_11-02-19 (2).jpg
photo_2023-01-27_11-02-20.jpg
photo_2023-01-27_11-02-22.jpg
photo_2023-01-27_11-02-25.jpg
photo_2023-01-27_11-02-27.jpg
 

Latest posts

Back
Top