• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

Front Injector Sump

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Skybolt31

Registered Users
*
Joined
Aug 28, 2006
Messages
1,394
Reaction score
422
I have a front injector sump for an angle valve IO-360-A series engine with the Christen inverted fittings already installed. Sump is in great shape, one of the intake tubes has a dent in it from hitting on the cowling, there are no cracks around the dent, it still functions fine. The sump is painted red, the paint is fair, there is a place with no paint where a sump heater had been glued. Looking to get $700 including shipping to lower 48









 

Latest posts

Back
Top