• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

Barrett Ignition

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Roy35ka

Member
Joined
Feb 7, 2011
Messages
23
Reaction score
3
I have a new build with a stock M14P. I installed a second hand Barrett electronic ignition that the original owner was dissatisfied with.
The timing instructions in the Barrett manual are a bit cryptic. My understanding is the timing light on off signal is to be set to 23 crank advance 15 measured at the prop. When set that way, the engine has all the characteristics of being too far advanced. Tries to kick back when starting and very high CHT.
I am thinking there are 2 possible explanations.
Is the ignition definitely set to 15 advance or is it possibly set to 0 like other electronic ignitions?
Maybe I have a faulty ignition.
Any experience out there?
 

Latest posts

Back
Top