• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

Stabilizer and elevator angle

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Jean-luc

Well-Known Member
Lifetime Supporter
Joined
Jul 18, 2007
Messages
972
Reaction score
88
For the Pitts S1 , the stabilizer is set at a + 2° angle incidence. On the plan sheet 1-210 , the # 124 tube axis and the #121 bracket axis have the same dimension 1"3/8 from the upper fuselage tube axis .So that makes the elevator to be set at a 0° incidence . Is that correct or should the elevator be set at + 2° incidence as well ,so in the same plan of the stabilizer ?
 

Latest posts

Back
Top