- Joined
- Jan 24, 2011
- Messages
- 246
- Reaction score
- 42
I ahve recently purchased an Acro II that is 90% complete that has an 0-360 a4a installed with a conversion to fuel injected with a Bendix injector that is rear mounted. Has anyone used this combination and if so how did you route the air to the injector from the front air screen in the cowl. I want the injected system as I plan to use the plane for aerobatics and will install a Christian inverted oil system. Any ideas will be appreciated.
Tad
Made a stupid error in this post. the engine is a 0-360 A4K not an A4A. Must have hit the wrong key when typing. I thank all who have responded with ideas. I keep ho[eing that I can find a sump that will allow the servo to be mounted toward the front. I was told that most of the 0360 sumps fit other 0360's. If this is the case I would be in business if I could find one. Does anyone know what model 0360 has a forward mounted servo?Edited by: tdpole1
Tad
Made a stupid error in this post. the engine is a 0-360 A4K not an A4A. Must have hit the wrong key when typing. I thank all who have responded with ideas. I keep ho[eing that I can find a sump that will allow the servo to be mounted toward the front. I was told that most of the 0360 sumps fit other 0360's. If this is the case I would be in business if I could find one. Does anyone know what model 0360 has a forward mounted servo?Edited by: tdpole1