• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

acrosport I engine mount

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

oldtimer

Well-Known Member
*
Joined
Jun 10, 2009
Messages
46
Reaction score
3

my acrosport I has an 11 inch engine mount and a lycoming O-320/mccauley prop.

i notice some acs I are using a longer mount. looks like the plans call for a 11 inch mount with this engine.

bill berrick used a 17 inch mount on his acrosport I and same engine/prop combination as mine!!

what length are others using with this engine/prop?

thank you for any and all replys.



Edited by: oldtimer
 

Latest posts

Back
Top