Z32MadMan
Well-Known Member
- Joined
- Nov 6, 2015
- Messages
- 81
- Reaction score
- 18
I bought an S-1C this summer that will be getting a new fabric and a minor rebuild/clean up next year.
While the fabric is off, I figured I would look into adding a brace to the horizontal stab and making sure it was built with the beefed up horizontal support tube.
Any ideas on how to identify if the stronger (P/N 1-210-166) tube was used?
Does the S-1 use the same stab brace support struts and lower mounting bracket as listed in the S-2A Service Bulletin?
Chris
While the fabric is off, I figured I would look into adding a brace to the horizontal stab and making sure it was built with the beefed up horizontal support tube.
Any ideas on how to identify if the stronger (P/N 1-210-166) tube was used?
Does the S-1 use the same stab brace support struts and lower mounting bracket as listed in the S-2A Service Bulletin?
Chris