Aileron Hinge Bracket

Become a Subscribing Member today!

The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

Why become a Subscribing Member?

In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.

We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).

Annual membership also comes with two BiplaneForum.com decals.

Become a Subscribing Member and access the Biplane Forum in full!

Subscribe Now

John Burnett

Well-Known Member

May 12, 2007

On sheet 10 of my plans in the upper left hand corner

A "L" shaped bracket is shown with a 2" dimension aligned

with the centers of 2 holes. To the left of that a 2" dimension

is shown vertically also, I think, between these same 2 holes.

Which one of these dimensions, if either, is correct?

I checked in the errata encyclopedia

and the only change

that I see is the 3/4 to 3/8 offset modification.

Thanks,

John burnett