• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

Brake Pad Rivets

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Blues

Registered Users
Joined
Apr 13, 2009
Messages
75
Reaction score
14
My master cylinders are rebuilt, work great, no leaks. I decided to rebuild my caliper cylinders and replace the brake pads while I was at it. I've done this many times on autos, but here the pads must be riveted on after removing the old rivets and pads. These rivets are hollow. Is there a special rivet press for these hollow rivets?

HollowRivets.jpg
 

Latest posts

Back
Top