• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

Capstrip from Aircraft Spruce

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Little Scrapper

Cassutt freak
Joined
Feb 15, 2013
Messages
852
Reaction score
201
I just received about 200 feet of 1/4" capstrip from AS. All of it is milled at .280" and a few at .270"

That's ridiculous, have any of you ever received capstrip with this tolerance so far out from .250" ?

The last time I ordered capstrip it was + or - about .003, with almost a .30" tolerance I can't possibly glue up against my 1/4" nose blocks.

Mike
 
Last edited:

Latest posts

Back
Top