Check out this welding.

[Jwhallon]

This is the fuselage I'm looking to buy. I know literally NOTHING about metal work but I've been told this is high quality and was done by a licensed master welder.
If all is sound, I'll be getting this plus the complete set of plans, tires and a few other parts all for $1850. Oh and a Skybolt hat for good measure! How are the welds as well as the condition of the metal?
uploads/20111224_131501_DSCN0242.JPGuploads/20111224_131527_DSCN0243.JPG
uploads/20111224_131539_DSCN0244.JPG
uploads/20111224_131605_DSCN0245.JPG
uploads/20111224_131633_DSCN0246.JPG

uploads/20111224_131659_DSCN0247.JPG
uploads/20111224_131726_DSCN0248.JPG
http://www.biplaneforum.com/uploads/temp/20111224_131738_DSCN0249.JPGhttp://www.biplaneforum.com/uploads/temp/20111224_131755_DSCN0250.JPGhttp://www.biplaneforum.com/uploads/temp/20111224_131804_DSCN0251.JPGhttp://www.biplaneforum.com/uploads/temp/20111224_131820_DSCN0252.JPGuploads/temp/20111224_131832_DSCN0255.JPG
http://www.biplaneforum.com/uploads/temp/20111224_131738_DSCN0249.JPGhttp://www.biplaneforum.com/uploads/temp/20111224_131755_DSCN0250.JPGhttp://www.biplaneforum.com/uploads/temp/20111224_131804_DSCN0251.JPGuploads/temp/20111224_131820_DSCN0252.JPG
http://www.biplaneforum.com/uploads/temp/20111224_131738_DSCN0249.JPGhttp://www.biplaneforum.com/uploads/temp/20111224_131755_DSCN0250.JPGuploads/temp/20111224_131804_DSCN0251.JPG

http://www.biplaneforum.com/uploads/temp/20111224_131738_DSCN0249.JPGuploads/temp/20111224_131755_DSCN0250.JPG
uploads/temp/20111224_131738_DSCN0249.JPGuploads/temp/20111224_132102_DSCN0257.JPG
uploads/temp/20111224_132119_DSCN0258.JPG
uploads/temp/20111224_132135_DSCN0260.JPG

uploads/temp/20111224_132155_DSCN0261.JPG


Original images size were 2.5 MB.

 

[StinsonPilot]

 

[Neil]

 

[Knight Twister]

 

[Kermit]