Does anyone have a discarded spar splice fixture used as a jig to splice the spars? I have reason to believe that mine is improperly drilled. When I insert the two inboard alignment pins, the spars fit nicely. However, when I attempt to insert the outboard pins (to level the wings), the predrilled holes are about 3/8" too far inboard to align with the predrilled holes in the spar. What am I doing wrong?
-
Become a Subscribing Member today!
The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.
The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.
Why become a Subscribing Member?
- In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
- We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
- Annual membership also comes with two BiplaneForum.com decals.
Become a Subscribing Member and access the Biplane Forum in full!
Eagle Spar Assembly
- Thread starter sarpysam
- Start date
- Joined
- Jun 27, 2007
- Messages
- 2,344
- Reaction score
- 991
Last edited:
