AlRice
Well-Known Member
- Joined
- Aug 18, 2006
- Messages
- 262
- Reaction score
- 0
If you are buying an engine mount from Steen Aero, be aware that they jig the 4 corners of the mount to be 29 1/8" wide. As a result, the mounting spools will fit OK at the bottom corners of station 0 on the fuse, but the "V" tubes that are welded at the top corners may interfere. My advice is to fit the "V" tubes "wide" at the top so that the spools will fit up against the vertical tubes at station 0. The "V" tubes in the picture are fitted on the centerline but will have to be notched to allow the engine mount spools to fit in the corners.