Anyone know if fuel tankfiller necks longer than 1 3/8"are available? My fuel level sending unit is close to the filler neck and has a thickness of about 3/4" which is enough to rub against the aluminum panel. I need a longer filler neck so I can lower the main fuel tank enough to clear the sending unit.Any sources? - need about 2 - 2 1/2" filler neck length.
-
Become a Subscribing Member today!
The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.
The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.
Why become a Subscribing Member?
- In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
- We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
- Annual membership also comes with two BiplaneForum.com decals.
Become a Subscribing Member and access the Biplane Forum in full!
Fuel Filler Neck
- Thread starter 4deuces
- Start date
Anyone know if fuel tankfiller necks longer than 1 3/8"are available? My fuel level sending unit is close to the filler neck and has a thickness of about 3/4" which is enough to rub against the aluminum panel. I need a longer filler neck so I can lower the main fuel tank enough to clear the sending unit.Any sources? - need about 2 - 2 1/2" filler neck length.
- Joined
- Sep 7, 2009
- Messages
- 7,660
- Reaction score
- 5,947
- Joined
- Sep 7, 2009
- Messages
- 7,660
- Reaction score
- 5,947
