• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

Gear Truss

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Paul

Well-Known Member
Supporting Member
*
Joined
Nov 16, 2006
Messages
69
Reaction score
0





HI all
The gear truss is the first major part I've attempted and as you can see from the photo one of the bungee supports moved quite a bit when I welded it.
I'm considering remaking it but would be interested in all thoughts as to whether it is usable or not.
I think the problem was I did not tack it in the right places.
20061214_232956_test3.jpg
 

Latest posts

Back
Top