- Joined
- Jul 23, 2014
- Messages
- 274
- Reaction score
- 63
Hi All,
an inspection ring cover decided to depart the wing during an acro session today
enlarged the front hole and cracked the rear one...
High res picture here
What are my options on fixing it? Hoping for some "easy" fix where I can attach (glue?) something to the inside without doing fabric work? I will rotate the inspection cover ~15-20' and drill new holes, but looking to do some reinforcement on the inside ? There's a round vinyl patch [from before] around the hole on the outside to prevent further paint cracking/breaking off from the prop wash...
Thanks in advance for any suggestions!
-Igor
an inspection ring cover decided to depart the wing during an acro session today
High res picture here
What are my options on fixing it? Hoping for some "easy" fix where I can attach (glue?) something to the inside without doing fabric work? I will rotate the inspection cover ~15-20' and drill new holes, but looking to do some reinforcement on the inside ? There's a round vinyl patch [from before] around the hole on the outside to prevent further paint cracking/breaking off from the prop wash...
Thanks in advance for any suggestions!
-Igor
![insp_ring.jpg insp_ring.jpg](https://cdn.imagearchive.com/biplaneforum/data/attach/24/24809-insp-ring.jpg)
Last edited: