• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

Lets get started!

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

MichaelG

Member
Joined
Aug 8, 2009
Messages
14
Reaction score
0


Guys, I've got some pictures of a brand new Toot project which is getting underway in my garage.
The first picture is the wing brackets which are cut from 0.125" chrome-moly steel. Note the full size templates which were laminated to cardboard from a shoe box.


Cutting and shaping the steel was slow, hard work, especially in 100 degree weather out here in California! The holes will be drilled later during assembly.


20091003_064736_IMG00149.jpg
http://biplaneforum.com/uploads/20091003_063122_IMG00149.jpgEdited by: MichaelG
 

Latest posts

Back
Top