Any suggestions as to pulley sizes to slow a wood bandsaw down to cut metal. It presently has a 2 1/2 " pulley driving a 6 in.
Starduster has a full corner in the hangar
Starduster has a full corner in the hangar
-
Become a Subscribing Member today!
The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.
The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.
Why become a Subscribing Member?
- In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
- We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
- Annual membership also comes with two BiplaneForum.com decals.
Become a Subscribing Member and access the Biplane Forum in full!
Metal cutting with wood bandsaw
- Thread starter Mark Wilkins
- Start date
- Joined
- Jul 13, 2012
- Messages
- 493
- Reaction score
- 183
- Joined
- Jan 25, 2018
- Messages
- 725
- Reaction score
- 230
- Joined
- Jan 24, 2008
- Messages
- 3,623
- Reaction score
- 2,248
- Joined
- Jul 19, 2012
- Messages
- 158
- Reaction score
- 42
- Joined
- Jan 31, 2018
- Messages
- 57
- Reaction score
- 41
- Joined
- Jan 31, 2018
- Messages
- 57
- Reaction score
- 41
- Joined
- Jan 31, 2018
- Messages
- 57
- Reaction score
- 41
