- Joined
- Mar 30, 2014
- Messages
- 1,024
- Reaction score
- 398
So flying around today I reached for the elevator trim and it didn't work. Fearing flutter, I slowed down and headed back to the airport. There was no real issue and I landed fine…..
Inspection showed that the solid wire running from the trim handle to the trim tab broke about 1 foot from the trim tab.
My control system is solid tubing till about 2 feet from the tail when it changes to a flexible outer housing with a solid wire cable running through it.
So I pulled out my caliper and it measured as 5/64…. Ah, but I can't find 5/64 cable listed at aircraft spruce…. I *think* BOWDEN CABLE INNER WIRE with a 0.78" diameter is the ticket. But I want to make sure before I order it and end up with the wrong thing and miss a weekends flying.
http://www.aircraftspruce.com/catalog/appages/stainlesssteel78.php
I did a search and it seems that I am correct… But looking for a little adult supervision.
And any tips on installing it?
Inspection showed that the solid wire running from the trim handle to the trim tab broke about 1 foot from the trim tab.
My control system is solid tubing till about 2 feet from the tail when it changes to a flexible outer housing with a solid wire cable running through it.
So I pulled out my caliper and it measured as 5/64…. Ah, but I can't find 5/64 cable listed at aircraft spruce…. I *think* BOWDEN CABLE INNER WIRE with a 0.78" diameter is the ticket. But I want to make sure before I order it and end up with the wrong thing and miss a weekends flying.
http://www.aircraftspruce.com/catalog/appages/stainlesssteel78.php
I did a search and it seems that I am correct… But looking for a little adult supervision.
And any tips on installing it?
Last edited:
