• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

Nose Bowl on an S1-S

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Gillegan

Registered Users
Supporting Member
Joined
Apr 4, 2017
Messages
4
Reaction score
0
Hi everyone. I recently purchased an S1-S "semi"-project. I say semi because there's not a lot that needs to be done. The seller had changed over to a cold air induction system and purchased a new, Wolf 4 into 1 exhaust but had not installed them. That along with a new nose bowl (the old one is looking a little worn out) and a new spinner is about all it needs. I called Aviat and they no longer make the nose bowl for the S1-S. Any suggestions on the which stock nose bowl might work with the inductions system would be appreciated.
 

Latest posts

Back
Top