• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

Nose Ribs

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

S2e

Well-Known Member
*
Joined
Nov 29, 2012
Messages
232
Reaction score
63
I'm going to build a second set of wings for my S2E. The first thing I'm going to do is route the nose ribs. Is this the right plywood to use: 1/4" Mahogany and Poplar Plywood Aircraft Grade MIL-P-6070 90 º5 PLY

If I remember correctly, we glued two 1/4 nose ribs together for the compression ribs.

Thanks
 

Latest posts

Back
Top