• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

Nuts on the valve stem

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

S2e

Well-Known Member
*
Joined
Nov 29, 2012
Messages
232
Reaction score
63
Before I make another mistake, do I have this right? The washer in the picture is sandwiched between the tube and the nut just to the right of the washer. And, I throw away the nut next to the yellow valve stem cap.

The wheel is a 5.00 - 5 Cleveland on an S2E.

Thanks


ImageUploadedByBiplane Forum1398006815.501845.jpg


Sent from my iPhone using Biplane Forum
 

Latest posts

Back
Top