• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

Panel Rebuild

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Need4Speed

Active Member
*
Joined
May 4, 2016
Messages
27
Reaction score
19
Just wrapped up a panel rebuild on N28SX; a James Barrett built Eagle II with a Monty Barrett built Angle Valve IO-540-S1A5. It is a Davis carbon fiber panel that I sanded & cleared, and installed a Dynon D-60, an MGL electronic G-Meter and a VM1000c engine / electrical / fuel monitoring system. Some here may remember this plane from the Muscle Biplane website a few years back. Here are some pictures:

Eagle0.jpg


Eagle1.jpg


Eagle2.jpg


Eagle3.jpg
 
Last edited:

Latest posts

Back
Top