Flying High
Well-Known Member
- Joined
- Aug 28, 2009
- Messages
- 612
- Reaction score
- 59
I need to replace some pilot static hose on my S2A.
I measured up a neighbours pitot static hose on his S-2B and the alloy hose from the wing looks to be 3/16 OD and the rubber hose is 5/16 OD. The rubber tube slips over the alloy pipe in the forward cockpit.
Where can I get the 5/16 OD clear rubber hose? Nothing that size on Spruce. Is it an uncommon size for pitot static systems?
I assume that the S2B is as per the factory installation.
Cheers,
I measured up a neighbours pitot static hose on his S-2B and the alloy hose from the wing looks to be 3/16 OD and the rubber hose is 5/16 OD. The rubber tube slips over the alloy pipe in the forward cockpit.
Where can I get the 5/16 OD clear rubber hose? Nothing that size on Spruce. Is it an uncommon size for pitot static systems?
I assume that the S2B is as per the factory installation.
Cheers,