• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

Pitot Static

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Jean-luc

Well-Known Member
Lifetime Supporter
Joined
Jul 18, 2007
Messages
962
Reaction score
86
For the pitot static lines myplan(Pitts S1S)asks for 5052-0 3/16 x .035 aluminium tubes,AN816-3D Nipples,AN818-3D Nuts,AN819-3D Sleeves,and 3/16 ID x 5/16 OD US plastic tube.At home,I have 3003-0 1/4 x .032 aluminim Versatube,all AN in 4D,and 1/4 x 3/8 Tygon.Does that can work,
 



















 
Last edited:

Latest posts

Back
Top