• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

pitts smoke tank removal

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Himant

Registered Users
Joined
Apr 28, 2009
Messages
50
Reaction score
4
Hi Guys,,I think there is a build up of wax/gunk inside my smoke tank from old oil and years of use. I was thinking of pulling it out and having it cleaned with a hot power washer, so i removed both forward side panels and looking at the tank im now wondering if i can get the tank out without pulling the forward stick and/or the fuel tank.. If anyone has ever pulled a factory smoke tank out and have some advice, or a way to clean it in place,,would be appreciated,,thanks in advance tom in indy.
 

Latest posts

Back
Top