• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

Polybrush/Void question

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mc06854

Well-Known Member
*
Joined
Oct 30, 2012
Messages
475
Reaction score
658
Location
Portland, tx
0E2FFE85-40BD-4ACF-A3E3-7C162C3F40F4.jpeg


After first coat of polybrush, I noticed a slight maybe 1/32 or less depression and the fabric won’t adhere there. Ray Stits recommends slicing it with a razor and then adding a Finishing tape.. I’d rather not slice it. Any recommendations or should I just leave it alone?
Thanks
 

Latest posts

Back
Top