dylanxpeters
Registered Users
Hey folks. I'm working on setting up the priming system on my Lycoming with a Cessna/Piper style primer plunger.
I'm making the primer lines from 1/8 copper tubing. I'd rather not use the AN800-2 soldered on ferrules with the AN4022-1 Nozzles. (both shown below)
Any of y'all know of a primer nozzle that would fit a lycoming (that atomizes the fuel properly) that accepts a regular AN 37deg 1/8" OD flare instead of the AN800-2 ferrule?
I'm making the primer lines from 1/8 copper tubing. I'd rather not use the AN800-2 soldered on ferrules with the AN4022-1 Nozzles. (both shown below)
![Screen Shot 2018-11-28 at 8.59.12 PM.png Screen Shot 2018-11-28 at 8.59.12 PM.png](https://cdn.imagearchive.com/biplaneforum/data/attachments/42/42213-80ec043a8f71b05ff4138ab42466e5a0.jpg)
![Screen Shot 2018-11-28 at 8.59.17 PM.png Screen Shot 2018-11-28 at 8.59.17 PM.png](https://cdn.imagearchive.com/biplaneforum/data/attachments/42/42214-dcc86d55263e06b45a8fa193b2b2d498.jpg)
Any of y'all know of a primer nozzle that would fit a lycoming (that atomizes the fuel properly) that accepts a regular AN 37deg 1/8" OD flare instead of the AN800-2 ferrule?