Radial and Delta Plan Sets

[fox_mike]

Hi there,

reading along here, I figured out that I might be missing some of the supplemental drawings. Since Steen didn't send a list along with the plans to verify the completeness, Jerry already offered me to compare what he's got to what I got. I decided to come up with a new thread so everyone can find it fast in case he needs.

BTW I dont want to blame Steen for my missing pages in any way, just to clarify what i have to ask them for (again, since I may have lost something).

Having said that, here' s what I got:

Edit: After talking to steen, I updated this list, it now shows everything what is currently part of the plan sets. (Jan 2015)

Sybolt Standard plans:
14 sheets ( each one is saying page X of 14 in the left lower corner, so this should be the correct amount.)

Delta supplement plans:
13 sheets in a pretty big format (ca. 91.5cm X 55.5cm, I dont kow how i'ts called in the US):

701 : Fuel Tank (wing center section tank)
702: Fuel Gauge
404 (1/2): Upper Wing Panel
404 (2/2): Upper Wing Details
SB3PW-212: Outboard Rib Assymbley
SB3PW-213: Inborad Rib Assy
SBSPW-211: Center Section Ribs
SB3PW-001: Center Section Front Spar
SB3PW-002: Center Section rear spar
SB3PW-209: Center Section Spars
SB3PW-210: Center Section Assembley
SBSPW-214: Cabane Mounts
SBSPW-215: Spar Locations

65 sheets of a smaller format (11 x 17 in)

SB3PW-003: Wing Attach
SB3PW-004: Wing Attach
SB3PW-005: Wing Attach
SB3PW-006: Wing Attach
SB3PW-007: Wing Attach
SB3PW-007: Wing Attach
SB3PW-008: Wing Attach
SB3PW-010: Wing Attach
SB3PW-011: Wing Attach
SB3PW-012: Cabane Attach
SB3PW-013: Cap Strips
SB3PW-014: Outboard Rib Ply Sheet
SB3PW-015: Cap Strips
SB3PW-016: Inboard Rib Ply.Sheet
SB3PW-017: Nose Rib Outboard
SB3PW-018: Nose Rib Inboard
SB3PW-019: Doubler
SB3PW-020: Doubler
SB3PW-021: Doubler
SB3PW-022: Doubler
SB3PW-023: Doubler
SB3PW-024: Doubler
SB3PW-025: Doubler
SB3PW-026: Doubler
SB3PW-027: Attach Angle
SB3PW-028: Attach Angle
SB3PW-029: Bushing
SB3PW-030: Compression Tube
SB3PW-031: Bushing
SB3PW-032: Spacer
SB3PW-033: Link
SB3PW-034: Bushing
SB3PW-035: Spacer
SB3PW-036: Link
SB3PW-037: Trailing Rib
SB3PW-038: Trailing Rib
SB3PW-039: Trailing Rib
SB3PW-041: Nail Strips
SB3PW-040: Grab Rail
SB3PW-042: Tank Support
SB3PW-043: Center Section Outboard Skin
SB3PW-044: Center Section Top Skin
SB3PW-045: Center Section Bottom Skin
SB3PW-046: Center Section Leading Edge
SB3PW-047: Tank Support
SB3PW-048: Cabane Attach
SB3PW-049: Cabane Attach
SB3PW-050: Sway Wire Mounts
SB3PW-051: Sway Wire Mounts
SB3PW-052: Filler
SB3PW-053: Cabane Attach
SB3PW-054: Cabane Attach
SB3PW-055: Filler
SB3PW-056: Filler
SB3PW-057: Doubler
SB3PW-201: Wing Attach
SB3PW-202: Wing Attach Assy Forward Right
SB3PW-203: Wing Attach Assy Rear Left
SB3PW-204: Wing Attach
SB3PW-205: Sway Wire Mounts
SB3PW-206: Landing Wire Mount
SB3PW-207: Compression Tube Assy
SB3PW-208: Nail Strips
SB3PW-216: Forward Strut
SB3PW-217: Rear Strut

There will be added one more sheet which shows the sway wire layout, they sent me a picture from one of the obsolete sheets to provide that information, I guess there will be a drawing for that in the future.

Radial supplement plans:
5 sheets of the big format:

210-1 : Fuselage weld assembley
210-2 : Fuselage details
301-1 : Control System
301-2 : Control System details
250 : Landig gear assembley

In addition, I got the builder's guide of Hale Wallace which refers to the standard Bolt.

If anyone is interested i can post that list as a PDF once I added the drawings i still need.

Cheers from Germany

Flo

 

[Jerry]

 

[fox_mike]

 

[fox_mike]

 

[jamiki]

 

[camwebb777]

 

[Jerry]

 

[fox_mike]

 

[the flying tony]

 

[camwebb777]

 

[fox_mike]