• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

Rigging Tailwheel

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Ed T

Well-Known Member
Lifetime Supporter
Joined
Aug 5, 2008
Messages
313
Reaction score
103
We're replacing a sagging spring on our S-2B (Maule tailwheel). Can someone please advise on proper tension or slack in springs/chains after the new spring is installed? With old spring there is slack. Perhaps there's already a good thread or other source for technical information. If so a link would be very helpful. Thanks--Ed
 

Latest posts

Back
Top