• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

Rudder cable material

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ccoffin

Well-Known Member
*
Joined
Nov 30, 2013
Messages
63
Reaction score
7
1. Is 1/8 cable used for all the rudder cable
2. Can swaged fork ends be used instead of the loops and shackles called out in the plans
3. If nicopress loops and Shackles are the only way to go, do you use the AN 115-46 called out, ASP has these for larger cable and calls out -21 for 1/8 cable.
 

Latest posts

Back
Top