nicko
Registered Users
- Joined
- Sep 3, 2011
- Messages
- 263
- Reaction score
- 12
Couple of questions for those of you with an old set of S-1C plans:
1) My rudder has some slop in the top hinge (pin hinge) so I am going to replace the bolt first before digging any deeper. Is that a particular type of bolt per the plans (I have a set of S1C plans but they are 700 miles from me at the moment)?
2) Just rebuilt my Maule tailwheel and bought a new wheel but my springs are slightly bent end to end. I would like to replace the springs prior to installing the new tailwheel. My S1S plans (Aviat) have the deminsions for the springs but no generic part number. Is there a set on ACS that you all use for the Maule?
1) My rudder has some slop in the top hinge (pin hinge) so I am going to replace the bolt first before digging any deeper. Is that a particular type of bolt per the plans (I have a set of S1C plans but they are 700 miles from me at the moment)?
2) Just rebuilt my Maule tailwheel and bought a new wheel but my springs are slightly bent end to end. I would like to replace the springs prior to installing the new tailwheel. My S1S plans (Aviat) have the deminsions for the springs but no generic part number. Is there a set on ACS that you all use for the Maule?