• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

SA 300 Elevator Controls

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Oct 26, 2018
Messages
116
Reaction score
48
Location
Houston, Texas
After reviewing the plans I have a question about the elevator pivot point orientation. Attached is a picture of the part in question. One side is 2” CL to CL the other is 2 3/4”. Should the 2 3/4” long side be pointed up or the 2” side? Looks like the 2” may be pointed up if I am reading it correctly
 

Attachments

  • B6B359D8-DA84-42BC-B34F-E83D6C7E03AE.png
    B6B359D8-DA84-42BC-B34F-E83D6C7E03AE.png
    128.6 KB · Views: 52

Latest posts

Back
Top