Wurzel
Well-Known Member
- Joined
- Apr 30, 2014
- Messages
- 53
- Reaction score
- 6
Hi there, I posted a thread asking for help with a canopy, but didn't get much response. I've attached a photo of what I've got; it's the type that slides back 6" then hinges open along one side. The canopy hinge point is fitted with a roller bearing to allow it to slide along the steel rods as well as pivot open ( see second photo) . What I need to know is how to attach the steel rods to the fuselage. I know there are quite a few Acrodusters out there using this Spruce canopy, so would really appreciate some drawings or photos. Huge thanks,
![ImageUploadedByBiplane Forum1409034100.220023.jpg ImageUploadedByBiplane Forum1409034100.220023.jpg](https://cdn.imagearchive.com/biplaneforum/data/attachments/8/8463-db8dcbf1715bd2579835052570521a1a.jpg)
![ImageUploadedByBiplane Forum1409034128.950340.jpg ImageUploadedByBiplane Forum1409034128.950340.jpg](https://cdn.imagearchive.com/biplaneforum/data/attachments/8/8464-97bb92998d5daf417bbf19e4b5e4d3de.jpg)
Sent from my iPad using Biplane Forum
![ImageUploadedByBiplane Forum1409034100.220023.jpg ImageUploadedByBiplane Forum1409034100.220023.jpg](https://cdn.imagearchive.com/biplaneforum/data/attachments/8/8463-db8dcbf1715bd2579835052570521a1a.jpg)
![ImageUploadedByBiplane Forum1409034128.950340.jpg ImageUploadedByBiplane Forum1409034128.950340.jpg](https://cdn.imagearchive.com/biplaneforum/data/attachments/8/8464-97bb92998d5daf417bbf19e4b5e4d3de.jpg)
Sent from my iPad using Biplane Forum