I'm making the U shaped stringer stand-off's. Now using 5/16" spacing.My question is has anybody used 2 part epoxy as a temp hold of parts[this case the 1/4" tube attached to the U portion of stand-off] for welding.I saw something similar on EAA Experimenter Video. I'm picking up the1/4" 035 tubing tomorrow. Should be interesting if that works. I have about30 of the U shaped parts ready to go. Mark
-
Become a Subscribing Member today!
The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.
The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.
Why become a Subscribing Member?
- In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
- We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
- Annual membership also comes with two BiplaneForum.com decals.
Become a Subscribing Member and access the Biplane Forum in full!
Stringer Stand-off
- Thread starter MarkRadio
- Start date
- Joined
- Jun 26, 2009
- Messages
- 630
- Reaction score
- 74
