The plans call for (4) AN5-6A bolts to attach the two upper wing sections
together. This length bolt looks about right to capture two wing attach
brackets, a shim, washer, nut, and still leave a few threads showing.
The problem is that I cannot fit an AN5-6A bolt in there since the butt of the
wing spar is in the way.
What is currently on the plane is a threaded stud with a nut and washer on
either side. Since there are no identifying marks on the stud I am inclined to
replace it.
Does anyone know if there are AN5 equivalent (or better) MS or NAS spec'd studs.
Thanks,
Glenn
together. This length bolt looks about right to capture two wing attach
brackets, a shim, washer, nut, and still leave a few threads showing.
The problem is that I cannot fit an AN5-6A bolt in there since the butt of the
wing spar is in the way.
What is currently on the plane is a threaded stud with a nut and washer on
either side. Since there are no identifying marks on the stud I am inclined to
replace it.
Does anyone know if there are AN5 equivalent (or better) MS or NAS spec'd studs.
Thanks,
Glenn