• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

wing spars

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Sbrown921

Member
Joined
Jan 28, 2010
Messages
16
Reaction score
0


Hey fellows I sure could use some help. I moved my plane from California to Georgia. from very dry, to very humid. Nowmy wing spars have started to separatealong the glue joint at the splice plates. includingwhere the spar halves are laminated together, on both front, and rear spars. The front spar isworse than the rear. How do I fix this?
 

Latest posts

Back
Top