• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

2 place Pitts canopy retaining clip

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

davidkarlsberg

Well-Known Member
*
Joined
Oct 31, 2014
Messages
60
Reaction score
40
I need the two clips that hold on the delrin tube that slides inside of the 2 place canopy. The part number is 62582, and for the short term I have used an 1/8 e clip, which works in a pinch. The hardware from the factory is a little different but I am not sure what they are called. For reference I am looking for part number 51. Thanks!
 

Attachments

  • Screenshot 2025-02-15 at 6.47.32 PM.png
    Screenshot 2025-02-15 at 6.47.32 PM.png
    70.9 KB
  • Screenshot 2025-02-15 at 6.47.42 PM.png
    Screenshot 2025-02-15 at 6.47.42 PM.png
    75.2 KB

Latest posts

Back
Top