Time to thin the herd. This is an Acroduster Too that was a flying plane before the engine and prop were sold to a Pitts pilot. No damage, just a few upgrades needed. Cabanes are the rod end type. Fabric is in great shape. Cover or windshield for the front hole, canopy for the pilot. EI engine analyzer and fuel flow. I started to make a pair of CF engine cowling sides. It’s registered to me, with airworthiness and logs.
Airframe $15k
With IO-540 engine kit and 3-blade Performance Propeller $27.5k.
I’m not entertaining offers; you either got it and want it or you don’t.
Airframe $15k
With IO-540 engine kit and 3-blade Performance Propeller $27.5k.
I’m not entertaining offers; you either got it and want it or you don’t.
![EF866762-527B-4818-BD3E-7F588452FC03.jpeg EF866762-527B-4818-BD3E-7F588452FC03.jpeg](https://cdn.imagearchive.com/biplaneforum/data/attach/78/78251-EF866762-527B-4818-BD3E-7F588452FC03.jpeg)
![96A23658-C96F-419F-9F09-547196DEE707.jpeg 96A23658-C96F-419F-9F09-547196DEE707.jpeg](https://cdn.imagearchive.com/biplaneforum/data/attach/78/78252-96A23658-C96F-419F-9F09-547196DEE707.jpeg)
![DF4F6179-BF9A-4294-880B-522D3690FE93.jpeg DF4F6179-BF9A-4294-880B-522D3690FE93.jpeg](https://cdn.imagearchive.com/biplaneforum/data/attach/78/78253-DF4F6179-BF9A-4294-880B-522D3690FE93.jpeg)
![2ACAA236-EBDA-43FF-B87C-5A085FA1CADE.jpeg 2ACAA236-EBDA-43FF-B87C-5A085FA1CADE.jpeg](https://cdn.imagearchive.com/biplaneforum/data/attach/78/78254-2ACAA236-EBDA-43FF-B87C-5A085FA1CADE.jpeg)
![0BF2CB59-BBF0-4734-B644-C812AD63467F.jpeg 0BF2CB59-BBF0-4734-B644-C812AD63467F.jpeg](https://cdn.imagearchive.com/biplaneforum/data/attach/78/78255-0BF2CB59-BBF0-4734-B644-C812AD63467F.jpeg)
![F903BAF9-EA87-4BAD-9CF8-784D8B7DCA70.jpeg F903BAF9-EA87-4BAD-9CF8-784D8B7DCA70.jpeg](https://cdn.imagearchive.com/biplaneforum/data/attach/78/78256-F903BAF9-EA87-4BAD-9CF8-784D8B7DCA70.jpeg)