• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

Finish for steel wing internals.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Ernie L.

Well-Known Member
Supporting Member
Joined
Jul 13, 2024
Messages
84
Reaction score
85
Location
Anna, Tx
I’m pulling all the fittings, push/pull tubes, and compression struts in my Starduster Too wings for a refinish, and do all y’all recommend epoxy paint finish or powder coat?
I have access to both.
Thoughts, and what are the Pro vs. Con on both…
 

Latest posts

Back
Top