• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

Leaky smoke

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bluroadster

Well-Known Member
Supporting Member
Joined
Feb 6, 2019
Messages
45
Reaction score
13
Location
Greenville, SC
So I installed a smoke system on a friend’s Eagle with its standard 4-into-2 exhaust. Per kit supplier instructions, I installed the injectors high up on the exhaust tubes for #1 and #2 cylinders, ahead of the exhaust slip joints on both sides. When activated the smoke is leaking out of the system on both sides out the rear of the cheek cowlings, enough to be noticeable in the cockpit thru the gasper vents. We ground ran it with cheek cowling off to try pinpointing the leaks. Both injectors are tight on their respective tubes. I suspect it’s escaping thru the slip joints, as I’ve heard there’s substantial back pressure in the stock exhaust. Does this seem plausible?
 

Latest posts

Back
Top