- Joined
- Oct 12, 2014
- Messages
- 2,005
- Reaction score
- 1,346
Stupid questions probably, but Lycoming engines are new to me, only had a Continental in my T-Craft and some experimental engines before... all those had either AN bolts and cotter pinned castle nuts (Continental & Mosler) holding the prop on, or bolts in threaded holes in the redrive pulley on 2-strokes, and thus the props only ever had straight thru holes for the bolts. The prop flange bushings in the O-290 in my Hatz are new to me, with the prop bolt holes counterbored from the back for the bushings... obviously no surprise to anybody familiar with these engines.
But (and the reason for my question), all those previous planes had wood props, whereas my current plane has a Sensenich metal prop... which I plan to replace with a wood prop. So the question is, do wood prop installations use the same bushings as the metal prop, with the prop bolt holes counterbored on the back side? And any prop maker should know the standard dimensions for those holes for a Lycoming?
The second question (see picture below) relates to the sealant inside the hub. The Lycoming overhaul manual shows an expansion plug in the crankshaft for fixed pitch prop installations which is I assume what is there, is adding additional sealant (looks like silicone) normal procedure? There's no evidence of leakage.
But (and the reason for my question), all those previous planes had wood props, whereas my current plane has a Sensenich metal prop... which I plan to replace with a wood prop. So the question is, do wood prop installations use the same bushings as the metal prop, with the prop bolt holes counterbored on the back side? And any prop maker should know the standard dimensions for those holes for a Lycoming?
The second question (see picture below) relates to the sealant inside the hub. The Lycoming overhaul manual shows an expansion plug in the crankshaft for fixed pitch prop installations which is I assume what is there, is adding additional sealant (looks like silicone) normal procedure? There's no evidence of leakage.
