baxterquadrants
Member
- Joined
- Jan 13, 2012
- Messages
- 24
- Reaction score
- 4
I received a call asking me if I could build a twin engine quadrant from a
8 X 10 inch drawing from Grumman Aircraft Engineering. I told Mark send me a copy and I will take a look.
He then said, I would like 3 functions the drawing has only one.
Here it is.
Baxter Quadrants Inc.
624 S.W. Langston Rd.
Renton, WA. 98057
(206)-303-7020
[email protected]
http://baxterquadrants.com
8 X 10 inch drawing from Grumman Aircraft Engineering. I told Mark send me a copy and I will take a look.
He then said, I would like 3 functions the drawing has only one.
Here it is.
Baxter Quadrants Inc.
624 S.W. Langston Rd.
Renton, WA. 98057
(206)-303-7020
[email protected]
http://baxterquadrants.com
![Grumman 1940 resized.jpg Grumman 1940 resized.jpg](https://cdn.imagearchive.com/biplaneforum/data/attach/4/4575-Grumman-1940-resized.jpg)
![Grumman side resized.jpg Grumman side resized.jpg](https://cdn.imagearchive.com/biplaneforum/data/attach/4/4576-Grumman-side-resized.jpg)
Last edited: