• Become a Subscribing Member today!

    The Biplane Forum is a large global active community of biplane builders, owners and pilots. From Pitts to Skybolts, to older barnstormers, all types are welcome.

    The Biplane Forum is a private community. Subscriptions are only $49.99/year or $6.99/month to gain access to this great community and unmatched source of information not found anywhere else on the web.

    Why become a Subscribing Member?

    • In addition to our active community, our content boasts exhaustive technical information which is often sought after for projects and maintenance. This information has accumulated over the 12+ years the forum has been in existence.
    • We are also a great resource for non biplane users, since many GA aircraft are built the same way (fabric and tube construction).
    • Annual membership also comes with two BiplaneForum.com decals.

    Become a Subscribing Member and access the Biplane Forum in full!

    Subscribe Now

Inspection Plates, Domed Clear $20 each

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

DanSalcedo

Well-Known Member
*
Joined
Dec 10, 2008
Messages
485
Reaction score
205
I have a few extra that I made. They are hand made, so not CNC and perfect.

They have 3 nutplates riveted to Lexan strip. The panel is made from Acrylic I have 8 of them.

The outer screws are on a 4" circle so they will go thru the inspection ring in the fabric. You have to drill the hole in the ring or you might already have the if you used screws in your existing panel.

They were supposed to have a 3.5 inch circle so they clamp in place and no need for holes, but that didn't happen.

$20 each plus shipping

Dan
 

Attachments

  • Insp Plate 1.jpeg
    Insp Plate 1.jpeg
    1.3 MB
  • Insp Plate 3 (1).jpeg
    Insp Plate 3 (1).jpeg
    1.3 MB
  • Insp Plate 3 (2).jpeg
    Insp Plate 3 (2).jpeg
    1.3 MB

Latest posts

Back
Top